IP apsaugos klasės (IP20, IP54, IP65, IP67, IP69K): ką reiškia skaičiai

IP protection ratings (IP20, IP54, IP65, IP67, IP69K): what the numbers mean

The IP rating is shown on almost every industrial component: buttons, sensors, connectors, cable glands and enclosures. It tells you how well the housing protects against solid objects and dust, and against water. Misunderstood IP ratings are a common cause of failures: an "IP67 connector" fills with water because it was not screwed tight, and a "water-resistant" sensor cannot withstand high-pressure washing. Below, you can see what the numbers mean and how to choose.

How to read an IP code

IP codes are defined by the standard IEC 60529 (in Lithuania – LST EN 60529). The code consists of the letters IP and two digits, e.g. IP65:

  • first digit (0–6) – protection against solid objects and dust;
  • second digit (0–9) – protection against water.

If a protection level was not tested, an X is written instead of the digit, e.g. IPX4 – tested for water only.

First digit: solid objects and dust

Digit Protection
0 No protection
1 Objects ≥ 50 mm (e.g. hand)
2 Objects ≥ 12.5 mm (finger)
3 Objects ≥ 2.5 mm (tool, thick wire)
4 Objects ≥ 1 mm (thin wire, screw)
5 Dust-protected – dust may enter, but not in an amount that interferes with operation
6 Dust-tight – no dust enters

Second digit: water

Digit Protection
0 No protection
1 Vertically falling drops
2 Dripping water when the enclosure is tilted up to 15°
3 Spraying water (rain) up to 60° from vertical
4 Splashing water from all directions
5 Water jets from a nozzle (6.3 mm)
6 Powerful water jets (12.5 mm nozzle)
7 Temporary immersion – up to 1 m, 30 min
8 Continuous immersion – conditions (depth, time) specified by the manufacturer; they are stricter than for 7
9 / 9K High-pressure, high-temperature washdown

IP69K derived from the road vehicle standard ISO 20653 (previously DIN 40050-9). Testing is done with 80 °C water, 80–100 bar pressure, from 10–15 cm distance and from several angles. Such a rating is required in the food and beverage industry, where equipment is cleaned with high-pressure washing systems. Example – Carlo Gavazzi ER4060 reflector (IP69K).

Most common ratings in practice

Class Where you will find them
IP20 Modules on DIN rail inside electrical cabinets: relays, power supplies, circuit breakers. Protected against finger contact, but not against dust and water.
IP40 Device connectors and equipment in dry rooms.
IP54 Cabinet fans and filters, e.g. Finder 7F.02.0.000.2000, equipment in dusty workshops.
IP65 / IP66 Control panels, buttons, signal lamps, e.g. Schneider Electric ZB5AA3TQ (IP66).
IP67 Sensors, M8/M12 connectors, limit switches, e.g. Omron D4N-4120.
IP68 Cable glands, e.g. LAPP SKINTOP ST-M M20×1.5, some M12 connectors.
IP69K Food industry sensors, reflectors, washable equipment.

Common mistakes

  • "A higher number is always better". According to IEC 60529, levels up to 6 are cumulative (IPX6 includes IPX5), but IPX7 and IPX8 do not necessarily include IPX5 or IPX6. An enclosure rated for immersion may not withstand a water jet. If you need both, look for dual ratings, e.g. IP66/IP67.
  • Connector not mated. The IP67 rating of a connector usually applies only when the plug and socket are mated and tightened. A disconnected socket or a loose cap provides no protection.
  • Enclosure IP – only as good as its weakest point. An IP66 box with an incorrectly sized cable gland or an unsealed opening is no longer IP66. For how to select a cable gland, see the article how to choose a cable gland.
  • IP does not tell the whole story. The IP rating does not cover resistance to corrosion, UV radiation, chemicals, condensation or temperature. These are checked separately in the datasheet.

How to choose

  1. Closed electrical cabinet in a dry room – IP20 is sufficient inside; the cabinet itself is usually IP54 or higher.
  2. Production workshop with dust and occasional splashes – IP54–IP65.
  3. Outdoors, near washdown equipment, coolant zones – IP65–IP67.
  4. Immersion or continuous water exposure – IP68 under the conditions specified by the manufacturer.
  5. High-pressure washdown with hot water – IP69K.

How to find them on inteq.lt

Similar Posts