Catalogue

Showing 2337–2352 of 2413 results

PololuModules
2.1 A · 6.5–44 V · 1/128
CODE2998
Stepper motor driver TB67S128FTG, 2.1 A, 6.5–44 V, up to 1/128 – Pololu 2998
26,60 € incl. VAT
Board with Toshiba TB67S128FTG for driving bipolar stepper motors: up to 1/128 microstepping, SPI or STEP/DIR control. Reverse polarity protection, integrated regulator.
- Manufacturer: Pololu
- Manufacturer code: 2998
- IC: TB67S128FTG
- Continuous current: 2.1 A
- Motor voltage: 6.5–44 V
- Logic voltage: 2–5.5 V
- Microstepping: up to 1/128
- Interface: SPI
- Dimensions: 30.5 × 40.6 mm
Add to cart
PololuModules
1.5 A · 8.2–45 V · 1/32
CODE2133
Stepper motor driver, 8.2–45 V, 1.5 A, 1/32 step – Pololu 2133 (DRV8825)
26,40 € incl. VAT
Module with TI DRV8825 chip for controlling one bipolar stepper motor via STEP/DIR signals, with a potentiometer for setting the current limit. Suitable for 3D printers, CNC and other projects; the format is compatible with A4988 modules.
- Manufacturer: Pololu
- Manufacturer code: 2133
- Chip: TI DRV8825
- Motor supply: 8.2–45 V DC
- Continuous current per phase: 1.5 A (without cooling)
- Max. current per phase: 2.2 A (with additional cooling)
- Logic levels: 2.5–5.25 V (no separate supply needed)
- Microstepping: 1, 1/2, 1/4, 1/8, 1/16, 1/32
- Current adjustment: potentiometer
Add to cart
PololuModules
Stepper · 2 A · 10.8 V
CODE2134
DRV8834 stepper motor driver, 2 A, 2.5–10.8 V – Pololu 2134
15,00 € incl. VAT
Pololu module with TI DRV8834 for bipolar stepper motors in low-voltage systems. Pin-compatible with the popular A4988, controlled via STEP/DIR signals.
- Manufacturer: Pololu
- Manufacturer code: 2134
- Controller chip: DRV8834
- Current per phase: up to 2 A
- Motor voltage: 2.5–10.8 V
- Logic voltage: 2.5–5.5 V
- Dimensions: 15.3 × 20.3 mm
Add to cart
Tic 36v4 USB stepper motor controller, DRV8711, 4 A, 8–50 V – Pololu 3140
91,80 € incl. VAT
Powerful Tic series stepper motor controller with DRV8711 driver: up to 4 A per phase, 8–50 V supply, microstepping up to 1/256. Controlled via USB, TTL serial, I²C, RC pulses, analog signal or quadrature encoder; settings configured with free software. Version with soldered headers.
- Manufacturer: Pololu
- Manufacturer code: 3140
- Type: stepper motor controller
- Driver: DRV8711
- Current per phase: up to 4 A
- Motor supply: 8–50 V
- Microstepping: up to 1/256
- Interfaces: USB, TTL, I²C, RC, analog
- Dimensions: 38.1 × 26.7 mm
Add to cart
Tic T500 USB stepper motor controller, MP6500, 1.5 A, 4.5–35 V – Pololu 3135
64,10 € incl. VAT
Tic T500 – universal stepper motor controller with MP6500 driver: up to 1.5 A per phase, 4.5–35 V supply, microstepping up to 1/8. Can be controlled via USB, TTL, I²C, RC, analog signal or buttons; parameters set with computer software.
- Manufacturer: Pololu
- Manufacturer code: 3135
- Type: stepper motor controller
- Driver: MP6500
- Current per phase: up to 1.5 A
- Motor supply: 4.5–35 V
- Microstepping: iki 1/8
- Interfaces: USB, TTL, I²C, RC, analog
- Series: Tic
Add to cart
PololuModules
DRV8825 · 1.5 A · USB/I²C
CODE3131
Tic T825 USB Stepper Motor Controller, DRV8825, 1.5 A, 8.5–45 V – Pololu 3131
56,10 € incl. VAT
Universal stepper motor controller with a DRV8825 driver and microcontroller. Controlled via USB, TTL serial, I²C, RC pulses, analogue voltage or quadrature encoder; configured with a computer program.
- Manufacturer: Pololu
- Manufacturer code: 3131
- IC: DRV8825
- Current per phase: 1.5 A
- Motor voltage: 8.5–45 V
- Microstepping: up to 1/32
- Interfaces: USB, TTL, I²C, RC, analog
- Protection: reverse polarity
Add to cart
JAWOModules
5.5 A · 20–60 V DC
CODEDMD560-SV
Stepper Motor Controller, 20–60 V DC, 5.5 A – JAWO DMD560-SV
123,00 € incl. VAT
Compact digital controller for two-phase bipolar stepper motors (4, 8 or 6-wire bipolar connection) with holding torque up to approx. 3 Nm. Used in CNC machines; features a built-in generator, analogue speed input and microstep interpolation.
- Manufacturer: JAWO
- Manufacturer code: DMD560-SV
- Motor type: 2-phase bipolar stepper
- Supply voltage: 20–60 V DC
- Max. output current: 5.5 A
- Current setting: programmable, 0.1 A steps
- Chopping frequency: 20 kHz
- Max. PULSE frequency: 300 kHz
- Input voltage: up to 30 V (auto-adaptive)
Add to cart
Human presence sensor mmWave radar, up to 9 m – DFRobot SEN0395
43,00 € incl. VAT
Millimetre-wave radar module that detects human presence even when stationary (e.g. sitting), unlike conventional PIR sensors. Detection range up to 9 m, power supply 3.6–5 V. Suitable for smart lighting, security and room occupancy monitoring.
- Manufacturer: DFRobot
- Manufacturer code: SEN0395
- Sensor type: human presence (radar)
- Sensing range: up to 9 m
- Power supply: 3.6–5 V DC
- Dimensions: 24 × 28 mm
Add to cart
PolyLite Glow – Polymaker filament, 1.75 mm, 1 kg
16,90 € incl. VAT
Genuine Polymaker filament, 1.75 mm. Some colours in stock in Vilnius, others within 7–14 days.

Select options This product has multiple variants. The options may be chosen on the product page
Panchroma Gradient Translucent PLA – Polymaker filament, 1.75 mm, 1 kg, Rainbow
27,90 € incl. VAT
Genuine Polymaker filament, 1.75 mm. Some colours in stock in Vilnius, others within 7–14 days.

Select options This product has multiple variants. The options may be chosen on the product page
Panchroma Gradient Satin PLA – Polymaker filament, 1.75 mm, 1 kg, Satin Rainbow
22,90 € incl. VAT
Genuine Polymaker filament, 1.75 mm. Some colours in stock in Vilnius, others within 7–14 days.

Select options This product has multiple variants. The options may be chosen on the product page
Polymaker HT-PLA Pro – Polymaker filament, 1.75 mm, 1 kg
23,90 € incl. VAT
Genuine Polymaker filament, 1.75 mm. Some colours in stock in Vilnius, others within 7–14 days.

Select options This product has multiple variants. The options may be chosen on the product page
Panchroma Gradient Silk PLA – Polymaker filament, 1.75 mm, 1 kg
27,90 € incl. VAT
Genuine Polymaker filament, 1.75 mm. Some colours in stock in Vilnius, others within 7–14 days.

Select options This product has multiple variants. The options may be chosen on the product page
PolyTerra Dual PLA – Polymaker filament, 1.75 mm, 1 kg
12,90 € incl. VAT
Genuine Polymaker filament, 1.75 mm. Some colours in stock in Vilnius, others within 7–14 days.

Select options This product has multiple variants. The options may be chosen on the product page
PolyLite Starlight PLA – Polymaker filament, 1.75 mm, 1 kg
16,90 € incl. VAT
Genuine Polymaker filament, 1.75 mm. Some colours in stock in Vilnius, others within 7–14 days.

Select options This product has multiple variants. The options may be chosen on the product page
PolyLite Luminous PLA – Polymaker filament, 1.75 mm, 1 kg
16,90 € incl. VAT
Genuine Polymaker filament, 1.75 mm. Some colours in stock in Vilnius, others within 7–14 days.

Select options This product has multiple variants. The options may be chosen on the product page