Showing 1–16 of 84 results
Heat-resistant and impact-resistant engineering material, easy to machine and glue. Printing in an enclosed chamber is recommended to prevent parts from warping.
Heat-resistant and impact-resistant engineering material, easy to machine and glue. Printing in an enclosed chamber is recommended to prevent parts from warping.
Similar in properties to ABS, but resistant to UV light and weathering – suitable for parts used outdoors and near windows. Printing in an enclosed chamber is recommended.
PET su anglies pluoštu (Fiberon serija): standi, matmenis išlaikanti inžinerinė medžiaga funkcinėms detalėms, atsparesnė temperatūrai nei PETG. Su anglies pluoštu – standesnė ir matinio paviršiaus; abrazyvi, todėl reikia grūdinto plieno arba volframo karbido antgalio.
Anti-static (ESD) PETG filament: dissipates static charge, making it suitable for electronics holders, trays, jigs and equipment parts in ESD zones.
PETG with recycled carbon fibre (Fiberon series): stiffer than standard PETG, easy to print, with a matte finish. The carbon fibre makes it stiffer with a matte finish; it is abrasive, so a hardened steel or tungsten carbide nozzle is required.
Stronger and more impact- and chemical-resistant than PLA, with low shrinkage. Suitable for functional parts: holders, guards, covers, cable channels.
PLA with carbon fibre (PolyLite series): prints easily like PLA, but stiffer with a matte surface. The carbon fibre makes it stiffer with a matte finish; it is abrasive, so a hardened steel or tungsten carbide nozzle is required.
The easiest material to print: low shrinkage, no enclosure needed. Suitable for prototypes, housings, holders and templates. Not suitable for parts exposed to temperatures above about 55 °C.
Matt PLA filament (PolyTerra series), prints easily and evenly. The easiest material to print: low shrinkage, no enclosure required. Suitable for prototypes, housings, brackets and templates. Not suitable for parts exposed to temperatures above about 55 °C.
The easiest material to print: low shrinkage, no enclosure needed. Suitable for prototypes, housings, holders and templates. Not suitable for parts exposed to temperatures above about 55 °C.
PPS with carbon fibre (Fiberon series): a high-end engineering material, resistant to high temperatures and chemicals, for parts under demanding conditions. Requires a printer with a high nozzle temperature. The carbon fibre makes it stiffer with a matte finish; it is abrasive, so a hardened steel or tungsten carbide nozzle is required.
Flexible, rubber-like material (elastomer). Suitable for gaskets, shock absorbers, protective caps and wheel covers. Print slower; best with a direct drive extruder.
Flexible, rubber-like material (elastomer). Suitable for gaskets, shock absorbers, protective caps and wheel covers. Print slower; best with a direct drive extruder.
Genuine Polymaker filament, 1.75 mm. Some colours in stock in Vilnius, others within 7–14 days.
Genuine Polymaker filament, 1.75 mm. Some colours in stock in Vilnius, others within 7–14 days.
Some product images and data: Data powered by TME.eu Data – no guarantee of data accuracy.
Answers are generated by artificial intelligence — please verify important information. Chat text is stored for 90 days to improve the service, photos are not stored (privacy). Do not enter confidential information.
